Our Products - Alkyd Resin Plants

 

Alkyd resins are of two types, drying and nondrying. They are the dominant resin or "binder" in most commercial "oil-based" coatings. An alkyd is a polyester modified by the addition of fatty acids and other components. The inclusion of the fatty acid confers a tendency to form flexible coating. Alkyds are used in paints and in molds for casting. Higher quality higher performance alkyds are produced in the fatty acid process where the composition of the resulting resin can be more precisely controlled. Alkyd coatings are produced in two processes; fatty acid process and the alcoholysis or glyceride process.

 

More economical alkyd resins are produced from the alcoholysis or glyceride process where end product quality control is not as paramount. In this process raw vegetable oil, high in unsaturated component, is combined with additional polyol and heated to cause trans-esterification of the triglycerides into a mixture of mono- and diglyceride oils.

 

We offer our clients a wide range of Alkyd Resin Plants. Based on our vast experience, we have been able to comprehend the minutest needs of our clients. Our constant endeavors to offer our clients with best services and products have been appreciated by our clients and helped us in building a positive brand image. We provide assistance to our clients in making the correct choice based on their budget and attempt to meet their requirements on time. Our professional attitude and valuable and efficient services have helped us garner a wide client.

 

ALKYD RESIN PLANTS

 

We offer a wide range of alkyd resin plant, long oil alkyd resin plant etc that is used mainly in the manufacturing of the enamel paints. In our range, we can offer long oil, medium & short oil. The capacities of these plants vary from 1 Ton to 20 ton, batch on solid base. We also have the facility to offer multipurpose oil alkyd resin plant and long oil alkyd resin plant where in the plant can run on solvent process or by fusion process. The heating unit will be high temperature thermic heater.


The finished product of alkyd is double than the solid base 50% solution. If the plant is 5 ton capacity; the finished product will be :

  • 7.5 ton to 10 ton depending on % solid base.


Raw Materials are used

  • Pthalic anhydride

  • Penta

  • Oil / DCO (dehydrated cast oil; sunflower or soya oil)

  • Rosin

  • Litherage / lithium hydroxide

  • Turpentine

Power Requirement
 

Capacity in Tons

Power in HP

1

20

2

25

3

30

5

65

10

120

Total batch time 16 hrs right from charging to filtration process

 
 

 
          Manufacturer and Exporter of Alkyd Resin Plant, Long oil Alkyd Resin Plant, Medium Oil Alkyd Resin Plant, Short Oil Alkyd Resin Plant manufacturer India                                 web resources